ZTE UMTS TCO Saving Solution

　　Based on its deep understanding of telecommunication technology and mobile market, ZTE is always devoted to provide the cost-effective solution for operators to construct the tip-top UMTS network with less CAPEX and OPEX.

　　• Fast Network Construction and Low CAPEX

　　→ Mature Distributed NodeB, Fast Network Deployment: Wide application of outdoor Node Bs and distributed Node Bs can greatly speed up network construction. ZTE BBU is 1U/2U in height, can be installed in standard 19 inches rack, supports flexible installation. ZTE series RRU including the smallest macro RRU in the industry can be directly installed against the wall, pole, tower, etc. BBU+RRU distributed Node B solution saves 20%~30% CAPEX and shortens 30%~50% deployment period.

　　→ Flexible Networking and IP UTRAN Supported: Support ATM/IP dual-protocol and rich interfaces including E1/STM-1/FE/GE, compatible with traditional TDM/ATM transmission, also support hybrid UTRAN and All-IP UTRAN.

　　→ High Receiving Sensitivity: With high receiving sensitivity up to-129.2dBm, 15%of sites can be saved for the same coverage compared with industrial average level.

　　→ Full Frequency Supported: Support UMTS 850M/900M/1800M/1900M/2100M/2600M, etc. Satisfy a variety of networking scenarios.

　　• Easy Network Expansion and Low OPEX

　　→ “Green” Revolution in Telecommunication Industry: As a vendor with high sense of social responsibility, ZTE commits itself to decreasing the power consumption of equipments to the lowest value. ZTE is now leading in the HPA design with its innovative technology. The HPA efficiency can reach 45% and save more than 30% power consumption, which can reduce equipment cost and save CAPEX.

　　→ 4 Carriers Supported: Support maximum 4 carriers, smoothly expanding from 1 carrier to 4 carriers with only software configuration, highly saving network expansion cost.

　　• Future-Oriented and smooth Evolution

　　→ SDR-Based Platform: Flexibly switch between 2G and 3G, saving evolution cost.

　　→ Smooth HSPA+/LTE Evolution: Future-oriented, smoothly evolve to HSPA+/LTE.

　　→ High Capacity Baseband Processing Board: ZTE innovative baseband design separates R99/HSPA processing capability, guarantees R99/HSPA service quality, and improves network performance. Each BP supports 43.2Mbps HSDPA throughput and 15Mbps HSUPA throughput and is hardware ready for HSPA+.